Rotopax 2 Gallon GEN 2 Gasoline-Rotopax Gas Gas-Fuelpax-Gen 2-Gas Can

Description

2 Gallon Gasoline GEN 2
Introducing the NEW RotopaX 2 Gallon. Same capacity and dimensions as our original 2 Gallon without the complicated twisting bottom! For those that love the shape and size of the original, but also like saving some money, this is the pack for you.
Capacity
Each single pack holds 2 gallons
Dimensions
17 1/4 L x 13 1/2 W x 3 H
Weight
4.2lbs empty, 16.2lbs full.
Red Gas container only, mounting kit sold separately, Spout included, Made in the USA
Roto-molded gas can that is durable with thicker walls and stronger construction make it leak-proof along with a sure seal gasket to guarantee your spout wont leak or vibrate loose. Rotopax are the only rotationally molded EPA and CARB compliant containers available for sale in the United States. This is thanks to a patented three layer Roto-Molding process, along with specialty formulated plastic barrier material to meet the governments new extremely low permeability requirements.
CARB EO: G-11-044B
PLEASE ALWAYS REMEMBER TO VENT THE FUEL PACK ONCE PER DAY IF THE ELEVATION OR TEMPERATURE CHANGES SIGNIFICANTLY.
THE BASE LINE REQUIREMENT FOR VENTING YOUR ROTOPAX IS AT LEAST ONCE A DAY OR EVERY 10 DEGREES IN TEMPERATURE CHANGE AND EVERY 1,000 FEET IN ELEVATION CHANGE, AS YOU USE YOUR ROTOPAX YOU WILL LEARN MORE OF WHAT IS REQUIRED DEPENDING ON YOUR LOCATION AND NEEDS. IN SOME CASES YOU MAY NEED TO VENT MORE THAN ONCE A DAY. USING YOUR ROTOPAX IN ARES WITH HIGHER HEAT AND ELEVATIONS WILL REQUIRE MORE ATTENTION. TO VENT YOUR ROTOPAX YOU WILL JUST NEED TO LIGHTLY UNSCREW THE CAP TO ALLOW THE ROTOPAX TO "BREATH". WE ALSO RECOMMEND FILLING YOUR CONATINER AS FULL AS POSSIBLE TO LEAVE LESS ROOM FOR BUILD UP AS WELL AS  THOROUGHLY WASHING OUT YOUR ROTOPAX BOTH WHEN YOU RECEIVE IT AND ANY TIME IT IS EMPTY AND STORED. THESE STEPS WILL HELP KEEP YOUR ROTOPAX IN THE BEST POSSIBLE CONDITION.
PLEASE RINSE YOUR CONTAINER THOROUGHLY AND ALLOW TO DRY FULLY TO REMOVE DEBRIS BEFORE USE.
We will not warranty packs not vented, as it is not a manufacture defect. Any modifications made to the container by the customer with products other than Rotopax mounting hardware and accessories will void the containers warranty (Ex. installing aftermarket venting devices, alteration to color of container, pressurized transfer systems, etc.)