-40%

Replacement Pressure Switch Craftsman Air Compressors w/ Relief Valve 95-125 PSI

$ 21.09

Availability: 100 in stock
  • Style: Replacement Craftsman Pressure Switch
  • California Prop 65 Warning: This Product contains chemicals known to the State of California to cause Cancer, and birth defects or other reproductive harm.
  • All returns accepted: Returns Accepted
  • Condition: New
  • Model: 69MB7LY/101SC/CAS250135/(2)112C
  • Design: 95-125 PSI Single Port Pressure Switch
  • Features: Preset to 95-125 PSI
  • Return shipping will be paid by: Seller
  • Item must be returned within: 30 Days
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Brand: Unbranded/Generic
  • MPN: 69MB7LY/101SC/CAS250135/(2)112C

    Description

    LEFOO 95-125 PSI air compressor pressure switch control valve with a single female NPT air inlet connection port, paired with a 1/4" FNPT brass tee, two 1/4" MNPT pipe nipples, and a 1/4" NPT 135 PSI safety relief valve. This setup is used to replace the pressure switch on older Craftsman compressors where the relief valve is built directly into the mount on the pressure switch. A common Craftsman compressor that uses this setup is model #919.165310
    This switch is equipped with an unloader valve, on / off lever, and a single female NPT air inlet port. The unloader equipped on this switch is used to unload the air pressure off the head of the compressor when the compressor shuts off, this way when it starts there is no pressure on the piston and the compressor can start load free.
    YOUR COMPRESSOR, COMPRESSOR PARTS, & ACCESSORY SUPERSTORE!
    Home
    All Products
    Contact Us
    Returns
    About Us
    MENU
    Store Pages
    Home
    All Products
    Contact Us
    Returns
    About Us
    Store Categories
    1/2" RapidAir Maxline
    3/4" RapidAir Maxline
    3/8" RapidAir Garage Piping
    Accessories
    Air Compressor Oil
    Air Compressor Pumps
    Air Compressors
    Air Hoses
    Air Tank Manifolds
    Belts
    Blow Guns & Tire Inflators
    Check Valves
    Compressor Rebuilt Kits
    Couplers & Fittings
    Electric Motors
    Gauges
    Hose Reels
    Intake Filters
    Magnetic Starters
    Pressure Switches
    Pulleys A Section
    Regulators, Filters, & Oilers
    Relief Valves
    Tank Moisture Drains
    Throttle Cont Cables & Valves
    Tire Inflators
    Unloader Valves
    Vibration Pads
    Other
    GREAT SELECTION OF PRODUCTS
    /
    FAST SHIPPING
    /
    FREE SHIPPING ON MOST ITEMS
    /
    PRODUCT KNOWLEDGE & SUPPORT
    Store Categories
    1/2" RapidAir Maxline
    3/4" RapidAir Maxline
    3/8" RapidAir Garage Piping
    Accessories
    Air Compressor Oil
    Air Compressor Pumps
    Air Compressors
    Air Hoses
    Air Tank Manifolds
    Belts
    Blow Guns & Tire Inflators
    Check Valves
    Compressor Rebuilt Kits
    Couplers & Fittings
    Electric Motors
    Gauges
    Hose Reels
    Intake Filters
    Magnetic Starters
    Pressure Switches
    Pulleys A Section
    Regulators, Filters, & Oilers
    Relief Valves
    Tank Moisture Drains
    Throttle Cont Cables & Valves
    Tire Inflators
    Unloader Valves
    Vibration Pads
    Other
    Store Newsletter
    Add our store to your Favorites to receive our email newsletters about new items & special promotions.
    General Interest
    SIGN UP
    Replacement Pressure Switch Craftsman Air Compressors w/ Relief Valve 95-125 PSI
    Product Description
    Craftsman Replacement Pressure Switch with Safety Relief Valve
    Brand new LEFOO 95-125 PSI air compressor pressure switch control valve with a single female NPT air inlet connection port, paired with a 1/4" FNPT brass tee, two 1/4" MNPT pipe nipples, and a 1/4" NPT 135 PSI safety relief valve. This setup is used to replace the pressure switch on older Craftsman compressors where the relief valve is built directly into the mount on the pressure switch. A common Craftsman compressor that uses this setup is model #919.165310
    This switch is equipped with an unloader valve, on / off lever, and a single female NPT air inlet port. The unloader equipped on this switch is used to unload the air pressure off the head of the compressor when the compressor shuts off, this way when it starts there is no pressure on the piston and the compressor can start load free. This valve usually has a 1/4" plastic or copper line that runs to the check valve or the head of the compressor. If your compressor does not have an unloader line, then this valve can be left not hooked up and the pressure switch will still function properly.
    This switch comes preset to turn the compressor on at 95 psi and shut off at 125 psi. This can be adjusted to any pressure within the factory minimum and maximum set points listed below.
    Pressure Switch Specifications:
    • Preset: 95-125 PSI
    • Minimum On: 35 PSI
    • Max Off Pressure: 150 PSI
    • Pressure Differential: 30-40 PSI
    • Compression Unloader Valve Connection
    • Female NPT Tank Connection.
    • Max Amps, 20 Amps at 120 Volts/ 12 Amp at 240 Volts, AND 9.6 Amp at 3PH 240 Volts
    What's Included:
    • (1) 95-125 PSI Pressure Switch
    • (1) 1/4" Female NPT Brass Tee
    • (1) 1/4" 135 PSI Relief Valve
    • (2) 1/4" NPT Brass Pipe Nipples
    Note: ¼” NPT measures ½” on a standard ruler.
    (California Residents Warning: This product contains or may contain chemicals including lead known in the state of California to cause cancer, birth defects, or other reproductive harm. We suggest washing hands after handling. California law requires this warning be given to all customers in the state of California. (California Health and Safety Code 25249.5 et seq.)
    Return Policy
    Return Policy We accept returns within 30 days of purchase. A 20% restocking fee applies on all items returned for a refund. If you receive a manufacture defective item and want to exchange it there is no restocking fee. No refunds will be given on items that have been opened or used and will be exchange only. Anything being returned must include all original parts sent or fees will apply. Buyer is responsible for return shipping costs to us. We will pay to ship the item replacement back to you. All returns need to have a note included with the buyers information and reason for return or exchange.
    Shipping
    Shipping At Compressor Source we are dedicated to our service for you! We ship all items within 24 hours of payment Monday-Friday. We are closed on weekends and holidays. Most all items ordered Tuesday-Friday by 12:00pm Central Time, will ship the same day. If for any reason there is an issue with your order we will contact you right away. If you are in need of expedited shipping, please contact us via ebay messaging system.
    Contact
    Contact For any questions you may have about your purchase, or any of our products feel free to message us via the eBay message system and we will respond within 24 hours Monday-Friday
    Payment
    Payment All Payments are made through PayPal. If you have any questions feel free to Message us via the eBay message system at any time.
    Feedback
    Feedback At Compressor Source we strive for great customer service and to sell the best quality parts at the lowest prices possible. We leave feedback for all purchases. If for any reason you are not satisfied with your purchase or have any issues, please contact us first via the eBay message system. We would love to have the opportunity to earn your positive feedback and look forward to your future business.
    Home
    All Products
    Contact Us
    Returns
    About Us
    Copyright © 2017
    Compressor-Source
    . All rights reserved.
    eBay Template Design by OCDesignsOnline